

針對機械加工廠的空調解決方案,機械加工廠的特點為生產工作場所,機械加工廠有少量發熱設備,機械加工廠內生產人員不會太多。根據機械加工廠的特點,空調選型推薦如下:L65機型。
This is a solution of A/C for a mechanical workshop. The characteristic of the mechanical workshop is the production of workplace, and there is a small amount of equipment. Production personnel are not too much. According to the characteristics of the space for the mechanical workshop, the selection of model is recommended as L65.
經濟效益評估:(Economic Evaluation)
-
該機械加工廠需安裝空調面積總計1000平方米左右,有少量發熱設備,對溫濕控制及節能有要求,依據實際情況每平米所需制冷量平均按350W計算,總需求的350KW制冷量。
The total area is of about 1000 square meters for the wood plant, and there is a small amount of heat source, and it requires the temperature and humidity control and energy saving features. Required cooling capacity per square meter on average calculated based on the actual situation according to 350W, the total demand for cooling capacity is of 350KW.
-
要滿足該項目350KW的制冷量,需使用L65機組6套裝機。
To meet the cooling capacity of 350KW, this project is needed to use six sets of unit (L65).
-
經濟效益對比估算:傳統空調滿足350KW制冷量的輸入功率至少為130KW左右,而L65機組6套主機的輸入功率合計為80KW,主機部分省電38.5%,全年共計節省電費9.6萬元以上。(按1年運行8個月,1月運行30天,1天運行8小時,用電按1元1度計算)
Comparison of economic benefit estimation: the traditional air-conditioning input power (350KW cooling capacity) is at least about 130KW, and the L65 input power per set is of 13.3KW. The energy saving is up to 38.5%. The annual saving is more than 96000 CNY. (According to 8 months per year, 30 days per month, 8 hours per day of operation, electricity by 1 CNY/1 degree calculation)